21.12.2011 RLT7870MG 1 of 3 RLT7870MG technical data high power infrared laser diode features ? lasing mode structure: single transverse mode ? peak wavelength : typ. 785 nm ? optical ouput power: 70 mw ? package: 5.6 mm electrical connection pin configuration bottom view n - type pin function 1 ld anode 2 ld cathode 3 absolute maximum ratings (t c =25c) item symbol value unit cw output power p o 70 mw pulsed output power* p o pulse 100 mw reverse voltage u r 2 t c operating case temperature t c - 10 ? +60 c storage temperature t stg - 40 ? +100 c * duty < 50%, pulse width <0.1s specifications (t c =25c) item test conditions symbol min. typ. max. unit optical specification cw output power cw, p o = 60mw p o - - 70 mw peak wavelength cw, p o = 60mw p 775 785 798 nm fwhm beam divergence cw, p o = 60mw U 7 9 11 deg 17 20 24 deg electrical specification threshold current cw i th - 40 50 ma operating current cw, p o = 60mw i op - 95 140 ma slope efficiency cw, p o = 60mw - 1.0 - mw/ma opera ting voltage cw, p o = 60mw u op - 1.8 2.2 v the above specifications are for reference purpose only and subjected to change without prior notice.
21.12.2011 RLT7870MG 2 of 3 package dimensons 9 mm package ( unit:mm )
21.12.2011 RLT7870MG 3 of 3 safety of laser light ? laser light can damage the human eyes and skin. do not expose the eye or skin directly to any laser light and/or through optical lens. when handling the lds, wear appropriate safety glasses to prevent laser light, even any reflections from entering to the eye. focused laser beam through optical instruments will increase the chance of eye hazard. ? these lds are emitting invisible light. cautions 1. operating methode ? this ld shall change its forward voltage requirement and optical ouput power according to temperature change. also, the ld will require more operation current to maintain same ouput power as it degrades. in order to maintain output power, use of apc (automatic power control) is recommended. which use monitor feedback to adjust the operation current. ? confirm that electrical spike cu rrent generated by switching on and off does not exceed the maximum operating current level specified herein above as absolute maximum rating. also, employ appropriat countermeasures to reduce chattering and/or overshooting in the circuit. 2. static electric ity ? static electricity or electrical surges will reduce and degrade the reliability of the lds. it is recommended to use a wrist trap or anti - electrostatic glove when handeling the product. 3. absolute maximum rating ? active layer of lds shall have high curre nt density and generate high electric field during its operation. in order to prevent excessive damage, the ld must be operated striclty below absolute maximum rating.
|
